| |
Concerned about security for your embedded device? Check
out the newest additions to the Fusion Product Line:
Use the Fusion Secure link (above).
Need development boards? We not only supply our gold-standard
Fusion software, we also sell development boards! Check
the link under Embedded Tools (above).
Working on a VoIP-enabled device? Then you want to check
out the SIP product profile included as a part of our
Fusion Net product line!
Check this site thoroughly and realize why Unicoi Systems,
Inc. products are a must for ALL of your embedded development
projects!
| |
 |
|
Embedded
Software Development Tools
Development
and Evaluation Boards
Falcon 561 Blackfin
|
The Falcon-561 is a prototyping and development
system
board for the powerful BF561 Symmetric Multi-processing
Dual Core BlackFin device. Its primary purpose
is to serve as a
hardware platform for software to capture
video and send it
out over an Ethernet link.
Using two 100 pin connectors, the board
offers access to both
the full 32 bits of Async bus as well as
both PPI (video) ports
and both high speed serial ports (SPORTS).
This allows
custom peripheral boards to be added easily
without the time
and expense of developing an entire board
from scratch.
|
Pricing/Orders:
Unicoi
Sales
Related Links:
Falcon561
product sheet
Boards
List
Breakout
Board
Quickstart
Platforms
Emulator
Package |
 |
| Features: |
|
- CVBS, S-video, and component (YCrCb)
video input
- 10/100 Ethernet (Davicom DM9000) with
status LEDs and
header for adding external PoE supply
- 64MB of SDRAM
- 4MB flash for code storage
- RS232 or optional RS422 port
- GPIO connector
- SPORT connector with primary and secondary
lines for
adding audio or interfacing to serial
codec eval boards
- All SPORTs and PPI signals available
on a single 100 pin
connector
- All ASYNC bus signals available on
a single 100 pin connector
- Memory: 64 MB 133 MHz SDRAM
Video In: ADI 7183 PAL/NTSC
- Built in input mux, two ADCs (4:2:2
sampling of component input)
- Features are programmable via I2C bus
interface
- 3 BNC connectors, 75 ohm, 1V PP nominal.
CVBS, S, and YCrCb formats.
Clocking:
- Video input recovered pixel clock with
SAV/EAV codes
Ethernet:
- Full duplex support at both 10 and
100 Mbps
- RJ-45 jack with status LEDs
- Davicom DM9000 with 32 bit data interface
- TCP/IP support via RTOS vendor
General Purpose I/O:
- .1” pitch 8 pin inline header;
signal list:
- PF8-11
- PF0/1 (I2C bus)
- 3.3V and GND
- Serial Port:
- BF561 Async Port with RS232 buffer
to 9-pin connector (Tx Rx data pins
only)
- RS422 option (requires adding ADM3491
level shifter)
SPORT0 connector
- 24 pin connector, AMP pn 1-104068-1
- includes all 8 SPORT signals, I2C
bus, and two PF pins
Video and Async Expansion connector
- 100 pin high density, Samtec TFM-150-32-S-D-LC
(mates with SFM series)
- Boot flash:
• primary boot via socketed 8 pin
serial EEPROM (25C640)
• 4MB flash (512K x 16) for code
JTAG
• JTAG connector for use with Analog
Device’s BlackFin ICE systems
Power
• Uses 3.3V and 5V, 6W typical,
<9W max
• 5 pin DIN and 4 pin AMP power
connectors
• On board supply for Vcore
• Four pin header for adding external
PoE (Power Over Ethernet) supply
Dimensions:
• 4” x 6” excluding
connectors
• approx 1” total height
|
Copyright © 2004 Unicoi Systems, Inc.
Email webmaster@unicoi.com
with your site questions/comments.
|
|
